Reset the BIOS to Default Settings (BIOS). Access the BIOS Setup utility. See Accessing BIOS. Press the F9 key to load the factory default settings automatically. Confirm the changes by highlighting OK, then press Enter. To save the changes and exit the BIOS Setup utility, press the F10 key.
Should I reset BIOS to default?
Since you do not know what resetting the BIOS to factory settings does, I highly recommend against it. Although it does not happen often, you can render your machine inoperable, even when it can not be fixed. This does not happen often, but there is a small possibility it can happen.
How do I reset my BIOS without resetting it?
The easy way to do this, which will work regardless of what motherboard you have, is to flip the switch on your power supply to off(0) and remove the silver button battery on the motherboard for 30 seconds, put it back in, turn the power supply back on, and boot up, it should reset you to factory defaults.
How do I change the default BIOS settings?
Reset the BIOS to Default Settings (BIOS). Access the BIOS Setup utility. See Accessing BIOS. Press the F9 key to load the factory default settings automatically. Confirm the changes by highlighting OK, then press Enter. To save the changes and exit the BIOS Setup utility, press the F10 key.
What will happen if the reset BIOS?
Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes. Whatever situation you may be dealing with, remember that resetting your BIOS is a simple procedure for new and experienced users.
How do I clear my BIOS settings?
Within the BIOS, look for the Reset option. It may be named Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar. Select it with your arrow keys, press Enter, and confirm the operation.
How do I reset my BIOS settings?
[Motherboards] How can I restore BIOS settings? Press Power to turn on the motherboard. During POST, Press <Del> key to enter the BIOS. Go to Exit Tab. Select Load Optimized Defaults. Press Enter to default settings.
How do I reset Uefi to default BIOS?
How do I reset my BIOS/UEFI to default settings? Press and hold the power button for ten seconds or until your system shuts completely down—power on the system. Press F9 and then Enter to load the default configuration. Press F10 and then Enter to save and exit.
How do I remove a BIOS password?
The simplest way to remove a BIOS password is to remove the CMOS battery simply. A computer will remember its settings and keep the time even when it is turned off and unplugged because these parts are powered by a small battery inside the computer called a CMOS battery.
Why would you need to alter the default BIOS settings?
Need to change your PC’s boot order or set a password? Older desktop and laptop computers feature hidden software called the BIOS. Changing this can improve how your computer works—or impede it from running properly. Here’s how to access and use the BIOS and some commonly modified settings.
Does resetting BIOS delete data?
So, when most people have decided to come across a common question recently: Does resetting BIOS erase data? The straightforward answer to the question is no. Resetting a computer’s BIOS will not erase any data stored in the Hard Disk Drive (HDD) or Solid-State Drive (SSD).
Will resetting BIOS affect Windows?
Clearing BIOS settings will remove any changes you’ve made, such as adjusting the boot order. But it won’t affect Windows, so don’t sweat that. Once you’re done, hit the Save and Exit command so your changes take effect.
Where is the CMOS reset button?
Resetting Your CMOS with a Case Button Turn off your computer. Disconnect your computer from the wall outlet. Locate the case button labeled “Clear” or “Reset.” It’s typically next to or near the power button. Hold the “Clear” or “Reset” button down for five to ten seconds, then release it.
What is UEFI mode?
UEFI stands for Unified Extensible Firmware Interface. It does the same job as a BIOS, but with one basic difference: it stores all data about initialization and startup in a UEFI and provides faster boot time. n. UEnineI supports drive sizes of 9 zettabytes, whereas BIOS only supports 2.2 terabytes.
Will remove CMOS battery Rethe set BIOS password?
Remove the CMOS battery. Removing the CMOS battery, like the one shown in the picture, causes the system to lose all CMOS settings, including the BIOS password.
What happens if the CMOS battery is removed?
If the computer is running while it is removed, nothing will happen until you shut it down and try to start it again. At that point, it will have forgotten its clock and (in most cases) reset all Bios settings to factory default.
How do I reset overclock to default?
Go to the “Advanced Chipset Features” in the BIOS and then click on the “CPU Multiplier” feature. The last option in the CPU multiplier is “Restore Default Settings.” Press “Enter” on it.
How do I reset my computer to boot to factory settings?
To reset your,r PC, Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings. Tap or click Update and Recovery, and then tap or click Recovery. Under Remove everything and reinstall Windows, tap or click Get started. Follow the instructions on the screen.
What happens if you change UEFI firmware settings?
The UEFI settings screen allows you to disable Secure Boot, a useful security feature that prevents malware from hijacking Windows or another installed operating system.
How do I restore UEFI?
Fix #1: Use bootrec. Insert the original Windows 7 installation CD/DVD and Boot from it. Select a language and keyboard, and click Next. Select the operating list (Windows 7) from the list and click Next. At the System Recovery Options screen, click Command Prompt—type: bootrec /fixmbr. Type: bootrec /fixboot. Press Enter.
What do load UEFI defaults do?
BIOS/UEFI Settings can be used to change the boot order, change keyboard control and troubleshoot problems on a computer.
